Canon Printer Error Code 5011 indicates a printer failure in the Canon Pixma mp280, MP282, MP480, MP490, and MP492 printers. Because the bulb is unable to turn on fast, the printer fails to initialize. If this error code shows on your printer, you will be unable to continue printing. This mistake might be caused by a variety of factors. When copiers and printers perform a lot of work or are old, they develop technical and mechanical flaws. Regardless of the brand. It happens in every printer.
In this post, we'll go through how to troubleshoot the Canon Pixma mp280 all-in-one inkjet printer's support code 5011. I hope this helps to resolve your problem.
Two Steps to fix in Canon 5011 Error Code:-
Before you begin the procedure, we urge that you carefully follow the steps outlined below to avoid problems and save time. These errors can occasionally be more difficult and time-consuming to correct. The procedure for resolving Canon Printer Error Code 5011 is straightforward for consumers to follow.
Step-1: Restart your Canon Printer
- To begin, disconnect the power connection from the power switch.
- After that, wait 10 minutes before plugging the power cord back into the power switch.
- Then, turn off the printer and gently open the printer cover to replace the ink cartridge accessible on the Canon printer.
- After adjusting, turn on the printer and close the printer lid again while it is initializing.
- Then, switch off the printer once more and concurrently long-press the ‘Power + Cancel' tab.
- You must first push the power button and then gently release the ‘Cancel' button.
- Click the ‘Cancel' tab a minimum of four times to eventually liberate both tabs at the same time.
Related Blog: How to fix HP Printer Error 79??
Step-2: If the above-mentioned solution didn’t work, try following this solution
Examine the piece of paper or foreign item in the printer ink cartridge in this solution. Verify if it is what it claims to be, whether it be a little piece of paper or another foreign thing. Whether it is discovered, gently remove it from the printer device and check to see if this resolves the issue.
Contact Info:
Visit Us: Printer Error Support
For Solution: https://www.printererrorsupport.com/blog/fix-canon-printer-error-code-5011/